Panasonic BB-HCM381A Operating Instructions Manual

Also see for BB-HCM381A - Network Camera: Operating instructions Operating instructions Important information Installation guide Troubleshooting

Contents

Panasonic BB-HCM381A Operating Instructions Manual Manual pdf 68 page image

Operating Instructions683. Click [Save] when finished.• New settings are saved.• When finished, "Success!" is displayed.4. Click [Go to Date and Time page].• The Date and Time page is displayed.NoteDate and time settings become incorrect depending on the length of power-ontime or the internal temperature. Using the Automatic Time Adjustment isrecommended.Setting DescriptionTime Setting • Select date and format (AM/PM or 24 H). These settingsare used for image buffer/transfer, operation time and timestamps on the buffered image. But E-mail subject and filename by E-mail or FTP transfer uses only 24 h format.Automatic TimeAdjustment• NTP (Network Time Protocol) server synchronizes thecamera's internal clock. It adjusts automatically every day.Check the box to enable it.• Set the NTP server IP address. In IPv4, set 4 digits (0—255) and 3 periods such as "192.168.0.253". But "0.0.0.0"and "255.255.255.255" are not available. In IPv6, set 8hexadecimal digits divided with ":". Consecutive 0s can beabbreviated as "::". Or set a host name (1—255characters).• Select your time zone.NoteThe camera will not synchronize to the NTP server if thetime setting from the NTP server moves forward orbackward more than 1 hour at a time. This is to protect thecamera's time setting from fraudulent NTP servertampering, incorrect time information, etc.Adjust Clock forDaylight SavingTime• During the daylight saving time, the internal clock is turnedforward an hour. The clock will shift one hour forward at theset time on the Start Day, and move back one hour at theset time on the End Day. Check the box to enable it.NoteAn "s" is put between date and time of time stamp whenenabling this feature. The time stamp will be attached tothe transferred images by the Image Transfer feature.