Operating Instructions[For assistance, please call: 1-800-272-7033] 171.2 Viewing Single Camera page1. Access the camera (see page 13).• The Top page is displayed.2. Click the [Single] tab at the top of the page.• When Security Warning window is displayed, click [Yes] (see page 18).• See page 19 for Security Warning window when using Microsoft WindowsXP Service Pack 2.3. Close the web browser.Note• Refresh interval is [Motion] by default. You can change it on the operationbar (see page 23).• Refresh interval may change depending on the network condition, PCperformance and what object you view. SD memory recording or IPsec willalso slow refresh interval.• When displaying video (Motion JPEG), the camera allows up to 30simultaneous accesses. When trying more than 30 accesses, the 31stuser will see a gray screen. (Maximum 30 accesses for a Buffered Imagepage too.)• To reduce the data traffic, the video can be automatically changed torefreshing still images on the General User page (see page 81).• To display the Single Camera page directly, add it to the [Favorites] on theweb browser.• When you view a dark image, enable the color night view mode on theCamera Setup page (see page 69). The image will be brighter, but therefresh interval may slow down and image quality may decrease in a darkplace.Capture ImageButton(see page 22)Operation Bar(see page 23)Refresh Interval(see page 23)Audio ControlBar (TalkButton, ListenButton andAdjustmentBar)(see page 32)Click to Center(see page 21)Camera ImageThe banner isdisplayed.(see page 20)Network CameraZoomFocusProgramAlarm1Alarm2PresetScanPan / Tilt640X480∗ResolutionSTD- +BrightnessOpenShortOutputRefresh Interval∗MotionPlease click here when gray color screen is displayedIn case of no audio, please click here.http://panasonic.co.jp/pcc/products/en/netwkcam/technic/sound/index.htmlRunning in IPv4 mode.