Menu
Panasonic AY-RP500 Service Manual
Also see for AY-RP500: Installation manualInstallation manual
                                   | |
4BOARD SETUPInstall the boards in the computer.There are three boards to be installed.1. Video compression board (TARGA200DV board)2. SCSI board3. JOG board [AY-RP500 board (JOG board)]Preparation1. Turn off the computer.2. Open the case of the computer. For details on how to do so, refer to the instruction manual that was provided with the computer.3. Confirm which PCI slot (the white connector on the motherboard) the video card is installed in. If the video card is already in thePCI slot that is the farthest from the CPU, you do not need to move the video card.4. In all other cases, move the video card according to the procedure described in steps 5 through 8 below.5. Remove the screws that secure the cover for the PCI slot that is farthest from the PCI, and then remove that cover.6. Remove the screws that secure the cover for the video card, and then remove the video card.7. Plug the video card into the PCI slot that is farthest from the PCI, and secure the cover in place with the screws.8. Store the screws and cover that were removed in a safe place. |
This manual is suitable for:
Product
Learn More
Legal
Copyright © 2024 OneStart. All Rights Reserved