Panasonic AW-RP501 Operating Instructions Manual

Also see for AWRP501 - HYBRID CONTROL PANEL: Operating instructions Service manual

Contents

Panasonic AW-RP501 Operating Instructions Manual Manual pdf 17 page image

-15-n Front PanelS P E E D . S WC H A N G EL O W H I G HZ O O MR E V E R S EN O R R E VZ O O M / F O U C U SE X C H A N G EO F F O NF O U C U SR E V E R S EN O R R E VT I LTR E V E R S EN O R R E VPA NR E V E R S EN O R R E V%00 Speed Switch Changing Switch[SPEED SW CHANGE, LOW/HIGH]Changes the polarity of SPEED Switch @9. If ZOOMlever #6, FOCUS Lever #7, or PAN/TILT Lever #8 ismoved while keeping SPEED Switch @9 depressed, thecorresponding operation takes place at low speed,provided that SPEED SW CHANGE Switch %0 is in theLOW position. If one of these levers is moved withSPEED Switch @9 depressed when SPEED SWCHANGE Switch %0 is in the HIGH position, the corre-sponding operation takes place at high speed.The speed polarity can also be changed by pressingSPEED Switch @9 while keeping MEMORY Switch @7depressed. When this step is taken again, the originalspeed polarity is restored. Take this step if it is difficultto shift SPEED SW CHANGE Switch %0 because thiscontrol panel is mounted on a console or the like.%1 Zoom Reverse Switch[ZOOM REVERSE, NORM/REV]Changes the operating direction of ZOOM Lever #6.The lens zoom moves toward TELE when ZOOM Lever#6 is moved toward TELE, or toward WIDE when it ismoved toward WIDE, provided that ZOOM REVERSESwitch %1 is in the NOR position. When ZOOMREVERSE Switch %1 is set to the REV position, lenszoom operation takes place in the opposite direction.With ZOOM REVERSE Switch %1 in the REV position,the operating directions shown on the panel arereversed. In this case, paste the supplied seal on thepanel.%0 %1 %2 %3 %4 %5