Panasonic AVC ULTRA AJ-UPX36OED Operating Instructions Manual

Also see for AG-CX350: Manual Operating instructions Manual Manual How to connect

– 97 –Chapter 4 Operation — Menu settings[ENCRYPTION]Sets the encryption method when the [NETWORK] menu → [WLAN PROPERTY] → [TYPE] → [INFRA(SELECT)]/[INFRA(MANUAL)] is selected.The items that can be set are as follows.f [WPA-TKIP], [WPA-AES], [WPA2-TKIP], [WPA2-AES], [NONE](Factory setting: [WPA2-AES])@@ NOTEt The setting is fixed to [WPA2-AES] when the [NETWORK] menu → [WLAN PROPERTY] → [TYPE] → [DIRECT] is set.[ENCRYPT KEY]Sets the encryption key. Set the key using a string of 8 to 63 characters or a hexadecimal number with 64 digits.(Factory setting: [01234567890123456789abcdef])[IPv4 SETTING][DHCP] Sets whether to use the automatic acquisition through DHCP or to use the DHCP server function of the camera.[OFF]: Does not use DHCP.[CLIENT]: Performs automatic acquisition through DHCP if connecting by setting [WLAN PROPERTY] → [TYPE] →[INFRA(SELECT)]/[INFRA(MANUAL)].[SERVER]: Enables the DHCP server function of the camera when connecting by setting [WLAN PROPERTY] → [TYPE] →[DIRECT].f Factory setting: [OFF][IP ADDRESS] Sets the IP address.f Factory setting: [192.168.0.1]@@ NOTEt Cannot be set when [WLAN PROPERTY] → [IPv4 SETTING] → [DHCP] → [CLIENT] is selected.[SUBNET MASK] Sets the subnet mask.f Factory setting: [255.255.255.0]@@ NOTEt Cannot be set when [WLAN PROPERTY] → [IPv4 SETTING] → [DHCP] → [CLIENT] is selected.[DEFAULT GATEWAY] Sets the default gateway.f Factory setting: [192.168.0.254]@@ NOTEt If you do not use default gateway, set to [0.0.0.0].t Cannot be set when [WLAN PROPERTY] → [IPv4 SETTING] → [DHCP] → [CLIENT] is selected.t Disables the setting for the default gateway when [WLAN PROPERTY] → [TYPE] → [DIRECT] is selected.[PRIMARY DNS] Sets the primary DNS server.f Factory setting: [0.0.0.0]@@ NOTEt Disables the setting for the primary DNS server when [WLAN PROPERTY] → [TYPE] → [DIRECT] is selected.[SECONDARY DNS] Sets the secondary DNS server.f Factory setting: [0.0.0.0]@@ NOTEt Disables the setting for the secondary DNS server when [WLAN PROPERTY] → [TYPE] → [DIRECT] is selected.[INFORMATION][STATUS]Displays the status of the network function.[UTILITY]Performs the various operations related to the network function.[NETWORK INITIALIZE]Restores the network setting status to the factory settings.[EASY IP SETTING]Sets the time to accept EASY IP Setup Software.The items that can be set are as follows.f [DISABLE], [20 MIN.], [UNLIMITED](Factory setting: [DISABLE])@@ NOTEt This is fixed to [UNLIMITED] when [NDI|HX] is selected in [NETWORK FUNC].[EASY IP CAMERA TITLE]Configure the individual device names to display in EASY IP Setup Software. (15 characters or less)