Panasonic AK-HRP200G Operating Instructions Manual

Also see for AK-HRP200G: Operating instructions Operating instructions Operating instructions Operating instructions Operating instructions

Contents

Panasonic AK-HRP200G Operating Instructions Manual Manual pdf 20 page image

20Parts and their functions (when operating a remote camera)This section describes the operation of remote cameras (AW-HE50/ AW-HE60/AW-HE120/AW-HE870 and AK-HC1500/AK-HC1800).Operation panelA beep (buzzer) sounds when a button is pressed. However, buttons do not beep when the buzzer is set to Off in setup mode.AUTOBLACK SET UPWHITEBARSTESTVFPOWERHEADPOWERDTLOFF SHUTTERONSTEP/SYNCKNEEOFFSKINDTLMATRIX5600K1 2 3 4 5 67 8 9 10 11 121. Camera power button Use this button to control remote camera power remotely. However, itwill not function unless the power of the camera itself is turned on.Each press of the button turns the power of the camera on or off.On (green): The camera is turned on.On (red): The camera is in standby.Short flashes(red)*1:Network authentication not possible in IP connectionmode.Off: The camera itself is powered off.*1 Short flashes have an interval of about 0.5 second.This cannot be used for AW-HE870 and AK-HC1500/AK-HC1800.2. Viewfinder power button This cannot be used for a remote camera.3. Color Bar Signal Output button Use this button to output the color bar signal from the camera.On (yellow): Color bar OnOn (green): TEST signal On (AK-HC1500/AK-HC1800 only)Off: Color bar Off4. Auto White Balance button Use this button to automatically adjust the white balance.On: Indicates that the auto white balance adjustment hasstarted.Flashing: Warns that the automatic white balance adjustment endedwithout being completed.Off: Indicates that the white balance has been adjustedcorrectly.5. Auto Black Balance button Use this button to automatically adjust the black balance.On: Indicates that the auto black balance adjustment hasstarted.Flashing: Warns that the automatic black balance adjustment endedwithout being completed.Off: Indicates that the black balance has been adjustedcorrectly.This cannot be used with the AW-HE2.6. Auto Setup button This cannot be used for a remote camera.7. 5600 K button <5600K>Use this button to make adjustments to achieve a white balance thatcorresponds to a 5600K color temperature.On: ONOff: OFFThis cannot be used for AW-HE50/AW-HE60/AW-HE120/AW-HE870/AW-HE2.8. Matrix button This cannot be used for a remote camera.9. Skin Detail button Use this button to apply coring to the detail enhancement of the skintone areas to soften or increase the enhancement of skin tone details.On: ONOff: OFFThis cannot be used for AW-HE50/AW-HE60/AW-HE120/AW-HE870/AW-HE2.10.Knee OFF button This cannot be used for a remote camera.11.Detail OFF button Use this button to disable the contour enhancement (hard/soft)function (detail enhancer) of image output.On: Detail enhancer offOff: Detail enhancer onThis cannot be used for AW-HE50/AW-HE60/AW-HE120/AW-HE870/AW-HE2.12.Shutter On/Off button STEP/SYNC select button Use thus button to turn the SHUTTER on or off. Press and hold thebutton to switch between STEP and SYNCHRO. In SHUTTER ONmode, the SHUTTER display select button and theSHUTTER display light, and the setting is displayed on thesetting display for about 2 seconds.On: SHUTTER ON (STEP/SYNCHRO can be selected)Off: SHUTTER OFF (STEP/SYNCHRO can be selected)• The adjustment values in SYNCHRO mode are not displayed on thesetting display. Furthermore, the adjustment operation is also notpossible.• If the shutter is turned off with AW-HE50/AW-HE60/AW-HE120, theshutter speed becomes 1/100 or 1/120 when the shutter is turnedon the next time.• This cannot be used with the AW-HE2.