25Parts and their functions (when operating a remote camera)(continued)IRIS/M.PED LOCKIRISM.PEDCHARAMENUSELECTTALLY/CALLALMOPTSENSEPUSHPREVIEWEXTD.EXTCOARSEAUTOFULLOPENCLOSECLOSE40384341425039445147494855525354464538.Character/Menu button Press and hold this button (for about 2 seconds) to turn the on or offthe camera menu.Press and hold (On):Turns on (displays) the camera menu.Press and hold (off):Turns off the camera menu.39.Select dial Use this dial to perform menu operations when the camera menu isdisplayed.For details on the camera menu, refer to the operating instructions forthe camera.Turn clockwise:Increases the selected value or selects in the downdirection of the menu.Turncounterclockwise:Decreases the selected value or selects in the updirection of the menu.Press:Confirms the selected value or confirms theselected menu.When no menu is displayed, the select dial serves as the FOCUS/ZOOM adjustment dial in the ZOOM/FOCUS setting mode. (→page 23)40.Red/green tally display, Call button The tally lights red when the tally signal connected to the previewconnector of the unit is on.The call button cannot be used during remote camera operation.On (red):The tally of the camera being operated is on.Off:The tally of the camera being operated is off.41.Alarm display This display indicates alarms.Consult your supplier if a failure occurs.On:An alarm (a cooling fan alarm) has been received from aremote camera.Flashing:Indicates that the power voltage of the unit has decreased.Off:Normal operating state42.Optical alarm display This is disabled for a remote camera.43.Iris/master pedestal lock buttonUse this button to disable (lock) iris and M.PED operation.The button lights red when operation is disabled. Press the buttonagain to release the lock.Off:Iris and M.PED can be controlled.Lit red:Operation is disabled (locked).Flashes red:(Quickflashingrate ofonce everysecond)Indicates that the Iris lever was operated when operationwas disabled (locked).When the Iris lever is returned to the lock position, thebutton turns off and normal control becomes possible.This also flashes if the camera adjustment values and irislever position are offset when the control target camera isswitched. At the point in time when the iris lever is movedto the position that matches the camera adjustment values,the button turns off and normal control becomes possible.Flashes red:(Slowflashingrate of onceevery 2seconds)Indicates that the master pedestal control wasoperated when the function was disabled (locked).When the master pedestal control is returned tothe lock position, the button turns off and normal controlbecomes possible.This also flashes if the camera adjustment values andmaster pedestal control position are offset whenthe control target camera is switched. At the point in timewhen the master pedestal control is moved tothe position that matches the camera adjustment values,the button turns off and normal control becomes possible.44.Iris lever )>Use this lever to adjust the iris level.This lever is enabled when the iris/master pedestal lock is off.If the auto iris is not on, the iris can be adjusted manually.When manual iris adjustment (when the and buttons are all off)Forward:Adjusts the iris in the CLOSE direction.Backward:Adjusts the iris in the OPEN direction.When auto iris is enabled (when the auto iris button is on),use this lever to adjust the convergence level of the auto iris of theremote camera.45.Master pedestal control Use this control to adjust the master pedestal level. Turn it clockwiseto increase the master pedestal.Turning the master pedestal control displays the setting onthe setting display for about 2 seconds.The master pedestal and the R, G, and B pedestal can be adjustedindependently. A master pedestal adjustment does not affect the R,G, and B pedestal values.Pressing the M.GAIN/M.PED DISPLAY SELECT button PED> twice displays the setting on the setting display.This cannot be used with the AW-HE2.46.Preview button Outputs the preview signal from the preview connector. (→page 34)On (press):Preview output ONOff:Preview output OFF
