Panasonic AJ-SPX900E Operating Instructions Manual

Also see for AJ-SPX900E: Mechanical Parts List Operating instructions Operating instructions

Contents

Panasonic AJ-SPX900E Operating Instructions Manual Manual pdf 20 page image

202-7 Warning and Status DisplayFunctionsBack tally lampWhen the BACK TALLY switch is set to [ON], the lampbehaves in the same way as the front tally lamp at theviewfinder.BACK TALLY switchThis switch controls the action of the back and reartally lamps.ON: Back and rear tally lamps enabled.OFF: Back and rear tally lamps disabled.WARNING lampThis lamp starts blinking or lights up if something unusualoccurs in the memory.LIGHT buttonUse this button to control illumination of the display window.Alternately pressing this button toggles illumination of thedisplay window on or off.Display windowThis window displays warnings, battery-remaining level,sound volume, time data, and other information.Rear tally lampWhen the BACK TALLY switch is set on [ON], the reartally lamp behaves in the same way as the back tally lamp.2-8 Display Window FunctionsP2 card/battery-remaining level indicationsMemory action status indicationError Code Indication (for more information, see [7-3Warning System])LOOPhMEDIA E FY minM s frm13 240DVTCG TIME DATE P- RECSLAVE HOLD W GPSBATT E FOVER OVER10OO40-dB3020DVDRIVE OP-SLOTCTLBattery-remaining level indication barFor a battery with a digital indicator (percentage indication), ifthe remaining level of the battery is higher than 70%, all sevensegments up to the “F” position are lighted.When the remaining level falls below 70%, the segments go outone-by-one for each drop of 10%. All seven segments can be setto light up when the battery-remaining balance is 100%. To doso select “100%” for the menu option BATT REMAIN FULL in the screen of the MAIN OPERATION page.Audio channel level meterWhen the MONITOR SELECT CH1/2 / CH3/4 switch is set to[CH1/2], the meter indicates 1 and 2 as the audio channelnumbers, together with their audio levels. When the switch is setto [CH3/4], the meter indicates 3 and 4 as the audio channelnumbers, together with their audio levels.Media-remaining space indication barThe bar indicates the remaining free space on each P2 card, using aseven-segment display.Each segment can represent either three or five minutes of remainingfree space, depending on the value set through the menu optionCARD REMAIN/. According to the set value, the segmentsdisappear one-by-one. The menu option CARD REMAIN / can befound in the screen on the MAIN OPERATIONpage.LOOPhMEDIA E FY minM s frm13 240DVTCG TIME DATE P- RECSLAVE HOLD W GPSBATT E FOVER OVER10OO40-dB3020DVDRIVE OP-SLOTCTLInformation indicationLOOP: Stays illuminated in LOOP REC mode. For informationabout the LOOP REC mode, see [3-5 Loop Recording].DRIVE: Stays illuminated when the menu option USB is set to“ON”.The menu option USB can be found in the screen on the SYSTEM SETTINGpage.OP-SLOT: Remains illuminated when a video encoder card isoperated in the optional slot.ᤨࠫDownloaded From CamcorderManual.com Panasonic Manuals