74 (E)CONTENTSRS-232C interface5. Command table$ Commands relating to operation controlO As for the return (completion) message, [ACK] isfirst returned when data is received, and theexecution message is subsequently returned. Itis only the execution message which is listed inthis table.O In the case of commands not listed in the table,ER001 (invalid command) is returned after [ACK]has been returned.VTRoperation Send commandSTOP [STX] OSP [ETX] 45 [STX] OSP [ETX]This command is for stopping the tape travel.Return (completion)messageSTANDBYOFF[STX] OBF [ETX] 45 [STX] OBF [ETX]This command is setting the VTR to standbyOFF.STANDBY ON [STX] OBN [ETX] 45 [STX] OBN [ETX]This command is setting the VTR to standby ON.VTRoperation Send commandSHTLFORWARD[STX] OSF:data [ETX] 45 [STX] OSF [ETX]This is the forward direction shuttle command.data = n : speed data0 : STILL1 : a0.032 : a0.13 : a0.24 : a0.55 : a16 : a1.857 : a4.1 (a3.1)8 : a9.59 : a16A : a32OThe a16 anda32 speed differ according to thesetting selected for setup menu No. 101 (SHTLMAX).OThe value for the DV/DVCAM tape is shown inparenthesis ( ).Return (completion)messageSHTLREVERSE[STX] OSR:data [ETX] 45 [STX] OSR [ETX]This is the reverse direction shuttle command.data = n : speed data0 : STILL1 : a0.032 : a0.13 : a0.24 : a0.43 (a0.5)5 : a16 : a1.857 : a4.1 (a3.1)8 : a9.59 : a16A : a32OThe a16 anda32 speed differ according to thesetting selected for setup menu No. 101 (SHTLMAX).OThe value for the DV/DVCAM tape is shown inparenthesis ( ).EJECT [STX] OEJ [ETX] 45 [STX] OEJ [ETX]This command is for ejecting the cassette tape.The resulting output picture and sound statusesdiffer according to the settings selected for thesetup menu No. 105 (AUTO EE SEL) and thesetup menu No. 111 (FRZ MODE SEL).PLAY [STX] OPL [ETX] 45 [STX] OPL [ETX]This command is for starting playback.REWIND [STX] ORW [ETX] 45 [STX] ORW [ETX]This command is for rewinding the tape.The resulting output picture and sound statusesdiffer according to the settings selected for thesetup menu No. 105 (AUTO EE SEL).The maximum tape speed differs according to thesetting selected for setup menu No. 102 (FF.REW MAX).FASTFORWARD[STX] OFF [ETX] 45 [STX] OFF [ETX]This command is for fast forwarding the tape.The resulting output picture and sound statusesdiffer according to the settings selected for thesetup menu No. 105 (AUTO EE SEL).The maximum tape speed differs according to thesetting selected for setup menu No. 102 (FF.REW MAX).REC [STX] ORC [ETX] 45 [STX] ORC [ETX]This command is for starting the recording.
