Panasonic AJ-PG50 Operating Instructions Manual

Also see for AJ-PG50: Settings guide Operating instructions

Contents

Panasonic AJ-PG50 Operating Instructions Manual Manual pdf 34 page image

34 Main Mode: Recording/Playback ScreenBefore you start playback, set the playback frequency, for-mat, and other settings in the menu. (➝ Setup Menu “SYSTEMMODE” page 106)1 Press the [PLAY] button.Playback begins. Clips play back in the order they wererecorded.Note:• Pressing the [REW] button instead of the [PLAY]button rewinds playback, while pressing the [FF] buttonfast forwards playback.• When clips in different compression formats are playedback, the video and audio between clips may be distorted.• When clips with the same video format but different audio bitrates are played back continuously, the audio between clipswill be muted.2 Press the [STOP] button.Playback stops and the input video (EE) is displayed. Adjusting the playback audio levelsFollow the procedure below to change the playback levels.1. Press the [AUDIO LEVEL-PB] button.The playback volume appears.2. Press the up or down cursor button.The levels of all channels can be adjusted.3. Use the left or right cursor button to select an audiochannel.The selected channel number flashes. Each of the chan-nels can be adjusted.4. After adjustment is finished, press the [AUDIOLEVEL - PB] button or [EXIT] button.The setting values are saved and the displayed informa-tion disappears.Note:• The setting values do not change when you turn off the pow-er.• If you press the [RESET] button during the changing of theaudio levels, the level of the selected channel is restored tothe default value.The playback speed can be varied to search for a scene.1 Press the left or right cursor button during playbackor STILL.Playback changes to high-speed or slow and indicated asSHTL +/– speed.2 Press the left or right cursor button to change play-back speed.• The playback speed changes each time the buttons arepressed. Maximum playback speed depends on the valueset by the REC/PB - REC/PB SETUP - SHUTTLE MAX menusetting (➝ Setting Menu “REC/PB SETUP” - “SHUTTLEMAX” page 91).• Audio is not played back at speeds faster than 10 times nor-mal speed.• The right cursor button changes the speed in forward direc-tion and the left cursor button changes the speed in back-ward direction.• Press the [STILL/PAUSE] button or [SET] button to pauseplayback. To return to normal playback, press the [PLAY]button.• The pulldown sequence may not be uniform for variablespeed playback of native recorded (including x1 speed)video.• Not all of the frames of a clip recorded in AVC-G format willbe played back during reverse playback and fast playback.Playing Back ClipsPlayback12Variable speed playback