122Chapter 7 Menu description tables (continued)The underlining in the variable range column indicates the setting in the presetmode.7-5-7 USER SW GAINItem Variablerange RemarksS.GAIN30 dB2OFor selecting whether or not to enable asetting of 30 dB for SUPER GAIN.2 : The 30 dB setting is enabled.O : The 30 dB setting is disabled.36 dB 2OFor selecting whether or not to enable asetting of 36 dB for SUPER GAIN.2 : The 36 dB setting is enabled.O : The 36 dB setting is disabled.DS.GAIN6 dB:2OFor selecting whether or not to enable asetting increase of 6 dB for DS.GAIN.2 : The 6 dB setting increase is enabled.O : The 6 dB setting increase is disabled.10 dB: 2OFor selecting whether or not to enable asetting increase of 10 dB for DS.GAIN.2 : The 10 dB setting increase is enabled.O : The 10 dB setting increase is disabled.15 dB: 2OFor selecting whether or not to enable asetting increase of 15 dB for DS.GAIN.2 : The 15 dB setting increase is enabled.O : The 15 dB setting increase is disabled.12 dB: 2OFor selecting whether or not to enable asetting increase of 12 dB for DS.GAIN.2 : The 12 dB setting increase is enabled.O : The 12 dB setting increase is disabled.20 dB: 2OFor selecting whether or not to enable asetting increase of 20 dB for DS.GAIN.2 : The 20 dB setting increase is enabled.O : The 20 dB setting increase is disabled.C U F RC U F RC U F RC U F RC U F RC U F RC U F R7-5-8 LENS/IRISItem Variablerange RemarksA.IRIS PEAK/AVE 000:030:100For determining the ratio of the peak to theAUTO IRIS reference.The higher the ratio, the greater theresponse to the peak inside the iris detectionwindow; the lower the ratio, the greater theresponse to the average value inside the irisdetection window.A.IRIS WINDOW NORM1NORM2CENTRFor selecting the auto iris detection window.NORM1: Window from the screen centerNORM2: Window from the bottom of thescreenCENTR: Window in the shape of a spot atthe screen centerS.IRIS LEVEL 000:080:100For setting the target value of the SUPERIRIS (backlight compensation function).IRIS GAIN CAMLENSFor selecting whether the IRIS GAINadjustment is executed by the camera or thelens.For a lens with an extender (k2, k0.8 etc.)that was manufactured before the DIGIPOWER type lens from Fujinon, the IRIScontrol on the unit will not operate properlywhen set to the CAM, since IRIS correctioncontrol is operated on the lens if theextender is inserted.IRIS GAIN VALUE 01:10:20For setting the IRIS GAIN adjustment value.The setting takes effect when IRIS GAIN hasbeen set to CAM.A.IRIS LEVEL 000:045:100For setting the AUTO IRIS target value.C U F RC U F RC U F RC U F RC U F RC U F R