Panasonic AG-HPX500P Operating Instructions Manual

Also see for AGHPX500E - MEMORY CARD CAMERA RECORDER: Operating instructions Service manual Quick manual Parts list Operating instructions

Contents

Panasonic AG-HPX500P Operating Instructions Manual Manual pdf 93 page image

93Connecting the AJ-RC10G Extension ControllerChapter 5 PreparationConnecting the AJ-RC10G ExtensionController• Some functions can be remote-controlled whenthe AJ-RC10G extension control unit (optional) isconnected to the camera.• When the AJ-RC10G is connected, the cameraautomatically enters remote control mode after thepower switches of both the camera and the AJ-RC10G are turned ON.• Be sure to turn OFF both the camera and the AJ-RC10Gpower switches before connecting or disconnectingthe controller cable.• If ECU DATA SAVE is set to OFF, the camera-relatedsetting values, which have been adjusted or set usingthe AJ-RC10G, will be cancelled when the camerapower switch is turned OFF. Also, the setting valuescannot be written to an SD memory card. However, themenu settings performed using the AJ-RC10G can bewritten to an SD memory card. Next time the AJ-RC10Gis connected, the setting values will return to the AJ-RC10G settings.ECU DATA SAVE can be selected from the screen on the CAM OPERATION page.• If ECU DATA SAVE is set to ON, the values adjusted orset using the AJ-RC10G are retained, even after thecamera power switch is turned OFF.• The USER switch on the camera does not functionwhen the AJ-RC10G is connected.• When controlling the shutter from the AJ-RC10G, theshutter speeds correspond to the speeds set by themenu on the camera, not the speeds written on the AJ-RC10G. The shutter speeds correspond as follows:AJ-RC10GShutter Speed IndicationCamera ShutterSpeeds100 (60) POSITION1120 POSITION2250 POSITION3500 POSITION41000 POSITION52000 POSITION6AJ-RC10GREMOTE connector