15Chapter 2 Parts and their FunctionsChapter2 Parts and theirFunctionsPower Supply and Accessory Mounting Section1 POWER switchUsed to turn on/off the power.2 Battery mountA battery pack from Anton/Bauer is mountedhere.For details, refer to [Mounting the Battery andSetting the Battery Type] (page 84).3 DC IN (external power input) socket (XLR,4P)This unit is connected to an external AC adapter.For details, refer to [Use of the external DC powersupply] (page 86).4 BREAKER switchWhen an excessive amount of current is fedthrough the video camera recorder, due to anyabnormal event, the breaker automatically turnsoff the power in order to protect the device.After the interior of the video camera recorder hasbeen checked and/or repaired, this button mustbe depressed. If there is no unusual reaction, theunit can be powered-up.5 Light shoeA video light or similar accessory can be attachedhere.6 Shoulder strap fittingsThe shoulder strap is attached here.For details, refer to [Attaching the Shoulder Strap](page 101).7 Lens mount (2/3-inch bayonet type)The lens is attached here.For details, refer to [Mounting the Lens](page 91).8 Lens leverTighten this lever to lock the lens to the lensmount.For details, refer to [Mounting the Lens](page 91).9 Lens mount capTo remove the cap, raise the lens lever.When the lens is not mounted, replace the cap.10 Lens cable/microphone cable clampThis clamp secures the lens and microphonecables.For details, refer to [Mounting the Lens](page 91).11 Tripod mountWhen you want to mount the AG-HPX500P/Eon a tripod, the optional tripod adapter (SHAN-TM700) is attached here.For details, refer to [Mounting the Camera on aTripod] (page 100).12 LENS jack (12-pin)The lens connection cord is connected here.For a detailed description of your lens, see therelevant manufacturer’s instruction manual.13 Battery release leverPull down the release lever to release the batterypack.14 Viewfinder left-right positioning ringFor details, see [Adjusting Viewfinder Right-LeftPosition] (page 88).15 Light control switchFor details, refer to [Power Supply] (page 84).16 Cable holderUsed to secure the light cable and microphonecable.1 36 2 6 512 1171089131514416
