81 MenuThe underlined settings are the factory mode settings.DISPLAY SETUP screen (continued)Item Description of settingsLCD ASPECT This is used to select the aspect ratio for the LCD monitor. SYS FORMAT needs to beset to 480i/60i or 576i/50i.AUTO:The aspect ratio is automatically selected based on the recording mode, playbackmode and other information.4:3:The aspect ratio is fixed at 4:3.When images are displayed with the 16:9 aspect ratio, black bands appear at the topand bottom of the screen. No parts of the images are missing.MENU BACK This is used to reduce the transmittance of the background behind the menu displayscreen so that the menu characters can be seen more easily.ON:The background transmittance is reduced.• This transmittance is not reduced while the LCD SET item on the DISPLAY SETUPscreen is being set.OFF:The background transmittance is 100 %.DOWNCON MODE This is used to set the down-converter output signal mode. A setting other than480i/60i or 576i/50i must be selected for the “SYS FORMAT” item.SIDE CROP, LETTER-BOX, SQUEEZEWFM This is used to select what is to be displayed on the waveform monitor.OFF: No displayWAVE: Waveforms are displayed.VECTOR: Vectors are displayed.The waveform monitor is not displayed during playback in the USB HOST mode.CARD FUNCTIONS screenItem Description of settingsUSER FILE Up to four sets of menu item settings can be saved on the SD memory card. Titlescan be given to the files which have been saved. (Page 29)SD CARD FORMAT This is used to format SD memory cards. (Page 28)
