19 PreparationsThis unit is provided with three kinds of screens: the thumbnail display screen, thumbnail display off screen(1394 input recording standby mode, playback standby mode) and PC mode screen. When [MENU/MODECHK] is pressed on any of these screens, the menu will be displayed. (No menus are displayed in the USBDEVICE mode or 1394 DEVICE mode.)Operations performed when the function buttons are pressedMenu operationsAG-HPG10This is used to move the menu highlighting to the item above;depending on the menu item, it is used to change the value.This is used to select items andenter their values. When there is asub-menu, it is used to display thesub-menu.This is used to move the menuhighlighting to the item on the right;depending on the menu item, it isused to change the value.This is used to move the menuhighlighting to the item on the left;depending on the menu item, it isused to change the value.This is used to displaythe menus. When it ispressed while a menu isdisplayed, the menu isexited.This is used to move the menu highlighting tothe item below; depending on the menu item, itis used to change the value.Example of a menu operation: (when thethumbnail display screen is displayed)1 Press [MENU/MODE CHK] to display themenu.2 Press and to move the menuhighlighting, and select the item.3 Press .• If another menu has been displayed, repeatsteps 2 and 3.• Depending on the item, the value is changedusing , , and .• Depending on the item, a confirmation screenwill be displayed.• Depending on the item, the original screen isrestored automatically.4 Press [MENU/MODE CHK] to exit the menu.For details on the menu operations on thethumbnail display off screen, refer to “Basicoperations on the setting menus” on page 74.
