Panasonic AG-GH4 series Firmware Update

Firmware update procedureModel: AG-GH4 series (Camera body)1. How to check firmware version1. Switch ON the power of the camera.2. MENU > “ SETUP” > “VERSION DISP” > “Body Firmware” to display the version information.Version display example2. Updating firmware[Preparation]1. Format an SD card (from 8MB to 64GB) with the camera.2. Download a firmware ZIP package from the Panasonic professional video support site athttp://panasonic.biz/sav/pass_e .3. Extract the ZIP package, and then copy the extracted firmware (“.bin” file) to the SDcard’s root (upper directory).[Performing update]4. Insert the SD card into the SD card slot on the camera. And DISCONNECT HDMI cable if connectedbetween AG-YAGH interface unit and AG-GH4 camera body.5. Turn ON the power of the camera, and press the “PLAY” button to go to update mode.6. At the “Version up” screen, choose Yes to execute. (Version display example)7. When the progress bar reaches at the end, camera automatically turn OFF > ON the power. Update work maytake approximately 5 minutes. Check the firmware version.CAUTION:Do NOT turn OFF the power or eject the SD card while update is in progress, interrupting communication betweenSD card and equipment may cause unrecoverable failure.Body1.1Ver.1.0-.-Ver.1.0

/ 1

Related manuals for Panasonic AG-GH4 series