Panasonic AG-CX10 Operating Instructions Manual

Chapter 4 Operation — Menu settings- 84 -[FREE/REC RUN]Sets how the time code generator advances.(Factory setting: [REC RUN])@ NOTE0 The setting is fixed to [REC RUN] when the [SYSTEM] menu → [SUPER SLOW] → [ON] is set.0 The setting is fixed to [FREE RUN] when the [RECORDING] menu → [PRE REC] → [ON] is set.0 The setting is fixed to [FREE RUN] when the [RECORDING] menu → [2 SLOTS FUNC.] → [BACKGR REC] is set.0 The setting is fixed to [REC RUN] when the [RECORDING] menu → [REC FUNCTION] → [REC MODE] → [INTERVAL] is set.[DF/NDF]Sets the count method for the time code generator.Enabled only when the frame rate of the [SYSTEM] menu → [REC FORMAT] is set to 59.94i/59.94p/29.97p.(Factory setting: [DF])@ NOTE0 The setting is fixed to [NDF] when the [RECORDING] menu → [REC FUNCTION] → [REC MODE] → [INTERVAL] is set.[UB MODE]Selects the user bits mode. User bits information is recorded in the clip.(Factory setting: [USER])[REC COUNTER]Sets operation of the counter for recording.(Factory setting: [TOTAL])[TIME STAMP]Selects whether to superimpose the date and time on videos that are shot. The display for the year, month, and day follows the [DATE FORMAT] setting.(Factory setting: [OFF])[FREE RUN] Advances regardless of the operation mode.[REC RUN] Advances only while recording.[DF] Uses the drop frame mode.[NDF] Uses the non-drop frame mode.[FRAME RATE] Selects the image information (such as frame rate) of the camera.[USER] Selects the user bits set in [UB PRESET].[TIME] Selects the local time. (hh, mm, ss)[DATE] Selects the local date and time. (YY, MM, DD, hh)[TC] Records the time code value as user bits.[CLIP NAME] Records the value that CAM INDEX (one character) and CARD COUNT (3-digit number) both converted to ASCII charactercode.Only enabled when the [SYSTEM] menu → [FILE FORMAT] → [MOV] or [MP4] is set.[TOTAL] The count continues cumulatively until either you press the USER button assigned to [RESET] or touch the USER button icon.[CLIP] Clears the counter value at the start of recording and counts the time for each recording.[OFF] Does not superimpose the date and time.[DATE] Superimposes only the date.[TIME] Superimposes only the time.[DATE&TIME] Superimposes the date and time.