Panasonic AG-CX10 Operating Instructions Manual

Chapter 4 Operation — Menu settings- 71 -[SKIN TONE DTL.]The skin of human subjects can be made to appear smoother when recorded.The items that can be set are as follows.≥ [ON], [OFF]@ NOTE0 If the background or anything else in the scene has colors similar to the skin color, they will also be smoothed.0 If the brightness is insufficient, the effect may not be clear.0 If you record a person in the distance, the face may not be recorded clearly. In this case, set [SKIN TONE DTL.] to [OFF] or zoom in on the face (close-up) to record.[MASTER PED]Sets the master pedestal.The items that can be set are as follows.≥ [j70]…[i70][GAMMA MODE SEL]Selects the gamma mode.[BLACK GAMMA]Sets the gamma curves of dark areas.[KNEE MODE]To avoid overexposure, select the compression level of the high intensity video signals received through the image sensor.[WHITE CLIP SETTING]Sets so that the brightest parts of the video signal cannot exceed a certain level.[WHITE CLIP]Switches the white clip function [ON]/[OFF]. The [WHITE CLIP LEVEL] setting value is enabled when [ON].The items that can be set are as follows.≥ [ON], [OFF][WHITE CLIP LEVEL]Sets the white clip level.The items that can be set are as follows.≥ [90%]…[109%][HD] Sets the gamma characteristics for HD (High Definition).[SD] Increases gain in darker areas more than HD gamma.[FILMLIKE1] Sets the characteristics that reproduce more highlight areas compared to HD gamma.[FILMLIKE2] Sets the characteristics that reproduce more highlight areas compared to [FILMLIKE1].[FILMLIKE3] Sets the characteristics that reproduce more highlight areas compared to [FILMLIKE2].[CINE-LIKE D] Sets gamma characteristics to produce images with an emphasis on contrast to provide a cinematic sensation.[CINE-LIKE V] Sets gamma characteristics to produce images that provide a cinematic sensation.[STILL LIKE] Sets the gamma characteristics for a digital still camera image tone.[j4]…[j1] Compresses dark parts.[0] Standard state[i1]…[i4] Expands dark areas.[AUTO] Sets up automatically depending on the signal from the image sensor.[LOW] Low setting (Compression starts at approx. 80%.)[MID] Medium setting (Compression starts at approx. 90%.)[HIGH] High setting (Compression starts at approx. 100%.)[OFF] Disables the Knee function.