Panasonic 5000 Series Operating Instructions Manual

Contents

MANAGER PROGRAMS Downline ProgrammingProgram 60: Downline ProgrammingWhen you change any of the files in your workstation, you can use the Downline Programto send the changes to all other workstations on your system. The explanations for thisprogram are divided into three sections: Downlining to All Workstations, Downlining to aSingle Workstation, and Downlining the PLU file. Refer to the procedure you need.All of the Downlining procedures reference the Downline File numbers listed below.Downline File Numbers0 Date & Time1 Subgroups2 All PLUs3 Cashiers4 Product Mix5 Messages & Prompts9 Coupons14 Tare Weights16 Major Groups20 KPS Standard Menu21 Master Files30 ServersDownlining to All WorkstationsIn most instances, after you change your program you must send the changes to allworkstations. Use the following procedure to downline (send) your files system-wide.Note: Do not use the following procedure to downline your PLU file without first readingthe warnings for PLU file downlining.1. With your keylock in MGR Mode, use this sequence to advance to the Downlineprogram. Your system displays the Downline menu, shown on the next page. Thismenu consists of more than one page. You can use the Cursor Up ( ) and CursorDown ( ) keys to move up and down in the Downline menu.5 CASH 6 0 CASH5-78 Panasonic 5000 Version 4.0 Operating Instructions - Rev. 2.0