Scanning documents 2cm3521 2-21Scanning documents Chapter 2– For details on the scan settings, refer to “Specifying the scan set-tings” on page 2-43.4 After specifying the settings, touch [OK].5 Load the document into the ADF (optional) or position it on the originalglass of the machine.6 Press the [Start] key on the control panel.The document is scanned, and the data is sent.2 NoteDo not turn off the machine until the scanned jobs disappear from the joblist.Selecting group addresses“Group” refers to multiple destinations that are registered collectively. Thefollowing procedure describes how to send data by selecting a group thathas been registered in advance.For details on registering groups, refer to “Registering group destinations”on page 3-21.
