7R4, R8, R16 DVR V8.1.0 User ManualSECTION 2: INITIAL SETUP2.2 Using the Wizard for initial configurationUse the Wizard to setup the basic configuration of your system. Advanced configuration options are available in the Setup menus.Refer to the firmware user manual (to be provided) for your recorder for more information.1. When the initial Wizard window appears, click Start Wizard to continue.2. The next Wizard screen is used to configure the network settings of the recorder. Initially, the recorder acquires network usingDHCP (Dynamic Host Configuration Protocol) which usually exists somewhere on your LAN. DHCP provides network settingsthat are compatible with other devices on your LAN.
