OHAUS FC5816 Service Manual

Also see for Frontier FC5816: User guide Instruction manual Instruction manual Instruction manual

Contents

OHAUS FC5816 Service Manual Manual pdf 38 page image

MOUNTING SUPPORT• In case the unit does not shut off you have to loosen the fixing screws of theimbalance sensor. Adjust the imbalance sensor more sensitive with theadjusting screw (clockwise).• Repeat those steps as often as the listed value of the imbalance shut-offtable is reached.• Switch off the unit with error message 01 and fill the rotor with the permittedimbalance weight.• The unit must not shut off after the start. In case the unit shuts off, you haveto lower the sensibility of the sensor.• In case you have to readjust the imbalance sensor when testing thepermitted imbalance weight, you have to repeat the procedure with theimbalance shut off.• Turn the unit off and on -> the movement sensor is turned on again.3.9 Replacing the control board• Remove the lower covering of the front housing as described in chapter 3.1.• Remove all electrical connections on the control board.• Remove the 4 screws and remove the control board out of the unit.• Put in the new control board, plug in all electrical connections and re-assemble theunit in reverse order.ATTENTION:In case of replacing the control board you have to adjust the unit.remove