OHAUS EC Series Instruction Manual

Also see for EC Series: Service manual Instruction manual

Contents

OHAUS EC Series Instruction Manual Manual pdf 14 page image

EN-10 EC Series5 SCALE SETTINGS; Long-press TARE to enter into the user-selectable scale settings (Setup mode).; In Setup mode:o Press Sample to step through available settingso Press Tare to accept the displayed setting and proceed to the next Setupparameter; Press C at any time to exit from the Setup mode.; Re-start the scale after changing settings in the Setup modeThe following parameters are available:Sets the period of inactivity beforethe scale automatically turns off.The following settings are available:0 = Off, 2, 5, 8 (minutes)5.1 Auto-OffWeight g0.. Auto-OffPiece Weight g/pcA.OffCount pcs------.Internal Count(disregard)Default SettingSets the range in which the zeroreading is maintained.The following settings are available:0 = Off, 1 = 0.5d, 2 = 1d, 3 = 2d,4 = 3d(d = scale division)5.2 Zero Tracking RangeWeight g2.. Zero TrackingRangePiece Weight g/pctrACCount pcs------.Internal Count(disregard)Default SettingSets the range in which the Zeroindication turns on.The following settings are available:0 = Off, 1 = 0.5d, 2 = 1d, 3 = 2d,4 = 3d(d = scale division)5.3 Zero Display RangeWeight g3.. Zero Display RangePiece Weight g/pc2EroCount pcs------.Internal Count(disregard)Default SettingSets the level in which the Stableindication turns on; the higher thesetting, the faster stabilization time.The following settings are available:0, 1, 2, 3, 4, 5 (level)5.4 FilteringWeight g1.. Filtering LevelPiece Weight g/pcFiltCount pcs------.Internal Count(disregard)Default Setting3 EC-textEN.pmd 8/9/2005, 1:41 PM10