Norton Clipper C13PE Owner's Manual

Norton Clipper C13PE Owner's Manual Manual pdf 26 page image

26IV. PARTS LIST SECTIONA. Ordering Information1. List model number and serial number of machine from the Machine’s SerialNumber Plate.2. List UPC number, part number, and Description of part DO NOT use theitem number. It is best to use the UPC number when ordering.3. Wherever alternate parts are shown due to product improvement, inspectthe part you have and provide additional description as necessary.4. Specify mode of shipping desired, such as, parcel post, truck, U.P.S., bestway, etc.For the nearest Norton Clipper distributor call 254-918-2310Common Replacement PartsDescription Part Number UPC3VX300 Set of three (3) 247304 70184647698Blade Shaft Nut ¾-16 Left Hand Thread(Operators Right Side Of Saw) 227156 70184673903Collar Tight 247203Collar Loose Assembly (With Pin) 247202Bearing Blade Shaft (1) (No Hardware) 227175 70184673905Wheel 4X1-1/2X3/4 Front (1) 227162 70184674102Wheel 8X2-1/2X3/4 Rear 227148 70184674103Wrench Open End 238212 70184628071Wrench Open End 238213 70184628074NOTE: All Parts Are Sold As Individual (each) Unless Noted OtherwiseKitted items are shown in a phantom lined box within the parts drawing.Blades Use Only Norton Diamond Blades. Contact your local NortonClipper Distributor or our Customer Service at 254-918-2310 for the best blade forthe application.All parts are designated as either Service Parts (S) or Wear Parts (W) in the Typecolumn in the parts listing. Wear parts are worn out through normal use of themachine. The wear period depends on the intensity of use of the machine,handling, and maintenance of the machine. Wear parts must be serviced andeventually changed following the indications of the manufacturer. Any wear due tonormal use of the machine will not be considered as a case of warranty for itemsdesignated as Wear Parts (W). For best performance and life Genuine NortonClipper replacement parts should always be used. Changes to part specifications,are subject to change with out notice.