Norton Clipper C13PE Owner's Manual

Norton Clipper C13PE Owner's Manual Manual pdf 15 page image

15 Understand and follow all of the instructions in this owner’s manual. If wet cutting, turn on the water supply so that there is a minimum of 4-6gallons per minute of water flow!! In critically hard aggregate, more than a single pass may be needed to cutthe desired depth. If the saw stalls in the cut, immediately stop the forward speed and raise theblade out of the cut. If this is not done the belts can fail or the blade may bedamaged. Go slowly with a new blade until it opens up, that is, until the diamonds canbe seen and felt.III. MAINTENANCEA. EngineFollow the below schedule for engine maintenance. NOTE: Check the HondaEngine manual that came with the engine for any changes to the maintenanceschedule. If the charts have any differences, follow the chart in the HondaEngine Manual. Norton does not warranty the engine. If any warranty orservice of the engine is required contact your nearest Honda service center, orfrom the Internet: http://engines.honda.com/dealer-locatorHonda engine (refer to owner's manual for complete maintenance.)Honda Engine Maintenance Schedule