Norton CTC701 Owner's Manual

Contents

Norton CTC701 Owner's Manual Manual pdf 7 page image

71.4 Safety instructions for working with the machineBefore Commencing Work:• Know your CTC701 Tile Cutting machine! Read the Operator’s manual carefully.Learn the operation, application and limitations, as well as the specific potentialhazards peculiar to this equipment and its usage.• Before commencing work, make yourself familiar with the working environment atthe place of use. The working environment includes: obstacles in the area ofwork and maneuver, the firmness of the floor, necessary protection at the siterelating to public thoroughfares and the availability of help in the event ofaccidents.• Keep the work area clean avoiding cluttered work areas.• Consider the work area environment!¾ Do not expose power tools to rain.¾ Wear rubber boots to further insulate yourself from the machine.¾ Mop up all excessive water around the work area before and after cutting.¾ Keep the work area well lit.• Keep visitors away. Do not let visitors contact tool or extension cord. All visitorsshould be kept at a safe distance from the work area.• Do not force the material into the blade.• Place the machine on an even, firm and stable base!• Check for correct mounting of the blade regularly.• Immediately remove damaged or badly worn blades, as any damaged or badlyworn blade is a danger to the operator.• The material to be cut must be held securely in place on the table to allow nounexpected movement during cutting operation.• Always cut with the blade guard in position.• Only use Norton diamond blades with continuous rim with the machine! The useof other tools can damage the machine and will void the warranty!• Read the blades’ specifications carefully to choose the correct tool for yourapplication.• Dress properly for the work being performed.¾ Do not wear loose clothing or jewelry which can get caught in moving orrotating parts.¾ Rubber gloves and non-skid footwear is recommended when workingoutside.¾ Wear protective covering to contain long hair.• Don’t overreach! Keep proper footing and balance at all times. The slipperysurface created during the drilling operation results in unstable footing.• Use safety goggles or safety glasses that meet ANSI Z87.1-2003 safetystandards.Electrical Safety Precautions:• Always turn off the machine and disconnect it from the main source of electricitybefore any work on the machine is done.• Make sure that all electrical connections are secure and properly insolated toeliminate contact of live wires with spray water or dampness.• When the machine is used with water, it is IMPERATIVE that you properlyground. Let a qualified electrician check in case of doubt.