National Instruments PXIe-5667 Getting Started Manual

Also see for PXIe-5667: Getting started guide

National Instruments PXIe-5667 Getting Started Manual Manual pdf 1 page image

GETTING STARTED GUIDEPXIe-5667 (7 GHz)Vector Signal AnalyzerNote Before you begin, install and configure your chassis and controller.This document explains how to install, configure, and test the PXIe-5667. The PXIe-5667 is amodular vector signal analyzer. The PXIe-5667 ships with the NI-RFSA instrument driver,which you use to program the device.The PXIe-5667 comprises the following devices:• PXIe-5605 RF downconverter module• PXIe-5622 IF digitizer module• PXIe-5653 LO source module• PXIe-5693 RF preselector module• PXIe-5694 IF conditioning moduleCaution The protection provided by this product may be impaired if it is used in amanner not described in this document.Hot Surface If the PXIe-5667 has been in use, it may exceed safe handlingtemperatures and cause burns. Allow the PXIe-5667 to cool before removing it fromthe chassis.ContentsElectromagnetic Compatibility Guidelines............................................................................... 2Verifying the System Requirements..........................................................................................2Unpacking the Kit..................................................................................................................... 2Verifying the Kit Contents................................................................................................ 4Preparing the Environment....................................................................................................... 5Installing the Software.............................................................................................................. 5Installing the PXIe-5667........................................................................................................... 6Interconnecting the PXIe-5667 Modules.......................................................................... 7Configuring the PXIe-5667 in MAX...................................................................................... 24Self-Calibration....................................................................................................................... 25Performing a Device Self-Calibration Using the NI-RFSA SFP.................................... 26Programming the PXIe-5667.................................................................................................. 27NI-RFSA Examples........................................................................................................ 29