National Instruments PXIe-5663E Getting Started Manual

Also see for PXIe-5663E: Getting started guide Getting started

National Instruments PXIe-5663E Getting Started Manual Manual pdf 1 page image

GETTING STARTED GUIDENI PXIe-5663E6.6 GHz RF Vector Signal Analyzer with Digital DownconversionNote Before you begin, install and configure your chassis and controller.This document explains how to install, configure, and test the NI 5663E. The NI 5663E is amodular 6.6 GHz RF vector signal analyzer (VSA) with digital downconversion. TheNI 5663E ships with the NI-RFSA instrument driver, which you use to program the device.You can also use NI-RFmx, available at ni.com/downloads, to program the device.The NI 5663E comprises the following devices:• NI PXIe-5601 (NI 5601) RF downconverter module• NI PXIe-5622 (NI 5622) IF digitizer module• NI PXIe-5652 (NI 5652) LO source moduleCaution The protection provided by this product may be impaired if it is used in amanner not described in this document.Hot Surface If the NI 5663E has been in use, it may exceed safe handlingtemperatures and cause burns. Allow the NI 5663E to cool before removing it fromthe chassis.ContentsElectromagnetic Compatibility Guidelines............................................................................... 2Verifying the System Requirements..........................................................................................2Unpacking the Kit..................................................................................................................... 2Verifying the Kit Contents................................................................................................ 4Preparing the Environment....................................................................................................... 5Choosing and Installing the Software....................................................................................... 5Software Options...............................................................................................................5Installing the Software...................................................................................................... 6Installing the NI 5663E............................................................................................................. 7Interconnecting the NI 5663E Modules............................................................................ 8Configuring the NI 5663E in MAX........................................................................................ 18