Menu
NRGence eco PDU PE series User Manual
                                                                                           | |
Contents
| 
eco PDU PE Series User Manual49IPv6 ConfigurationIPv6 is the new (128-bit) format for specifying IP addresses. The PDU’s IPv6IP and DNS addresses can either be assigned dynamically (DHCP), or a fixedIP address can be specified. For dynamic IP address assignment, select the Obtain IP addressautomatically radio button. (This is the default setting.) To specify a fixed IP address, select the Set IP address manually radiobutton and fill in the IP address with values appropriate for your network. For automatic DNS Server address assignment, select the Obtain DNSServer address automatically radio button. To specify the DNS Server address manually, select the Set DNS serveraddress manually radio button, and fill in the addresses for the Preferredand Alternate DNS servers with values appropriate for your network.Note: 1. If you choose Obtain IP address automatically, when the device startsup it waits to get its IP address from the DHCP server. If it hasn’tobtained the address after one minute, it automatically reverts to itsfactory default IP address (192.168.0.60.)2. If the device is on a network that uses DHCP to assign networkaddresses, and you need to ascertain its IP address, see IP AddressDetermination, page 71, for information.3. Specifying the Alternate DNS Server address is optional. |
Product
Learn More
Legal
Copyright © 2024 OneStart. All Rights Reserved