35enPreparing drinksThe information remains however at the topof the display in the form of a small symbol.a Bean container almost emptyb Water tank almost emptyc Replace water filterd Cleaning programme necessarye Descaling programme necessaryf Calc’nClean programme necessaryPrompts to take actionFill water tankbF If the action required was carriedout, e.g. filling the water tank, thecorresponding message and symbolwill disappear.Preparing drinksThis fully automatic coffee machine canbe operated using coffee beans or groundcoffee (but not instant coffee).If using coffee beans, they will be freshlyground for each brewing. For optimumquality, store the beans in a cool place insealed containers.F Important: Fill the water tank withfresh, uncarbonated, cold waterevery day. The tank should alwayscontain sufficient water for operatingthe appliance.Tip: Cups should be prewarmed, e.g.with hot water. This applies particu-larly to small thick-walled espressocups.For some settings, coffee is pre-pared in two stages (see the section“Aroma Double Shot” and “Twocups at once”). Please wait until theprocess is completely finished.Beverage selectionPress the K or L arrow button to selectdifferent drinks:The symbol for the selected drink will appearin the middle. The name of the drink andthe values currently set, e.g. for the coffeestrength and volume are shown in lower row.Ristretto30 ml (medium)normalThe following drinks can be selected:RistrettoEspressoEspresso MacchiatoCoffeeCappuccinoLatte MacchiatoCaffe LatteMilk frothWarm milkHot waterThe drink selected can be directly preparedwith the pre-set values or first adjusted toindividual taste.Drink adjustmentBy pressing the M arrow button, differentfields will appear for adjustment dependingon the drink.The field where the value can be changedhas a light background.An example:The values for a cup of coffee can bechanged as follows:■ Select “Coffee” with the K or L arrowbutton.Coffee120 ml (medium)normal