NEC VT440 Service Manual

Also see for MultiSync VT440: User manual Installation data Specifications User manual

NEC VT440 Service Manual Manual pdf 15 page image

E–11MENUENTERCANCELSELECTPOWERSTATUSON/STAND BYSOURCEAUTO ADJUSTRGBINPUTOUTPUTAUDIOININOUTOUTPC-CONTROL S-VIDEO VIDEOTerminal Panel Features11. RGB Input Connector(Mini D-Sub 15 pin)Connect your PC or other RGB equipment. Use the supplied sig-nal cable to connect to a PC.2. RGB Monitor Output Connector (Mini D-Sub 15 pin)You can use this connector to loop your computer image to anexternal monitor from the RGB input source.3. Audio Input / Output Mini JackThis is where you connect audio output from your computer. Orconnect additional external speakers here to listen to audio comingfrom your Video or S- Video input.4. Audio Input / Output Connector (RCA)This is where you connect audio output from a VCR, DVD player,or laser disc player. Or connect additional external speakers to lis-ten to audio coming from your RGB source.NOTE: Either connector 3 or 4 can be used for input or output, how-ever they cannot both be used for input simultaneously. It can dam-age your equipment.5. Video Input (RCA)Connect a VCR, DVD player, laser disc player, or document cam-era here to project video.6. S-Video Input Port (Mini DIN 4 Pin)Connect the S-Video input from an external source like a VCR.7. PC Control Port (Mini DIN 8 Pin)Use this port to connect your PC to control your projector. Thisenables you to use your PC and serial communication protocol tocontrol the projector. If you are writing your own program, typicalPC control codes are on page E-40.A cap is put on the port at the factory. Remove the cap when usingthe port.8. Built-in Security Slot ( )This security slot supports the MicroSaver ® Security System.MicroSaver ® is a registered trademark of Kensington MicrowareInc. The logo is trademarked and owned by Kensington MicrowareInc.7Slot for KensingtonMicroSaver Security System823564