NEC V551 Installation Manual

Also see for MultiSync V551: Specifications Control guide Manual Manual User manual

Contents

NEC V551 Installation Manual Manual pdf 1 page image

NEC Display Solutions of America, Inc.V551 Installation Guide55” LCD Display Rev 1.0www.necdisplay.com V551 Page 1 of 8Contents:Product Description and Notes Page 1Tilt Angle and Rotation Page 1Ventilation Requirements Page 2Display DimensionsFront, Top, Right Side, Left Side, Bottom Page 3Rear Page 4Optional Table Top Stand Dimensions Page 5Optional Speaker Dimensions Page 6Display with Optional Wall Mount Kit Page 7Input Panels Page 8Control Codes Page 8Product Description:Type: LCD DisplayResolution: 1920 x 1080 Dimensions without stand: 51.9” (W) x 30.5” (H) x 4.7” (D)Aspect Ratio: 16:9 Dimensions with stand: 51.9”(W) x 32.1”(H) x 15.7”(D)FCC: Class B Weight without stand: 83.8 lbs / 38.0 kgPower Consumption: 260 W (typ) Weight with stand: 88.7 lbs / 40.2kgBTU’s: 887.16 BTU/hourNOTES: This document is intended to be used as a reference guide to supply useful information for a design or installation. It is notintended to be a step-by step procedure for installation. Any ceilings or walls must be strong enough to support the monitor and the installation must be in accordance with any localbuilding codes. All mounts should make secure contact to wood studs. 4:3 sources can be displayed on the 16:9 screen in either normal aspect ratio with bars on the left or right, or stretched horizontallyto fill the screen using the menus (see “Aspect Modes” in menus and user manual). Distances are in inches, for millimeters multiply by 25.4. Distances may vary ±5%.Tilt Angle and Rotation: Below is the maximum angle the monitor can be tilted. Note that the monitor can only be tilted in either landscape or portraitorientation.