NEC V404 Installation Manual

Also see for MultiSync P404: Setup guide User manual User manual User manual User manual

Contents

NEC V404 Installation Manual Manual pdf 1 page image

NEC Display Solutions of America, Inc.V404/P404 Installation Guide40” LCD Display Rev 1.0www.necdisplay.com V404/P404 Page 1 of 10Contents:Product Description and Notes Page 1Tilt Angle and Rotation Page 1Ventilation Recommendations Page 2Display Dimensions Page 3-4Display Dimensions with stand Page 5Optional Table Top Stand Dimensions Page 6Dimensions of Optional Wall Mount (WMK-3255S) Page 7Compute Module Integration Page 8Control Codes Page 9Input Terminals Page 10Browser Control Page 10Product Description V404 P404Display Resolution 1920 x 1080 at 60HzMaximum Supported Resolution 3840 x 2160 at 30HzPower Consumption (Typical) 75W 92WPower Consumption (Max Brightness) 95W 115WPower Consumption (Overall Max)* 235W 260WBTU's (Typical) 255.91 BTU/hr 313.92 BTU/hrBTU’s (Max Brightness) 324.15 BTU/hr 392.40 BTU/hrBTU’s (Overall Max)* 801.85 BTU/hr 887.15 BTU/hrNet Dimensions 36.1 x 20.9 x 2.2 in. / 918.0 x 530.6 x 54.7mmNet Weight 40.3lbs. / 18.3kg*Overall Max refers to when the unit is at max brightness and the following features are also active: OPS Slot, External Speaker, Raspberry PiCompute Module SlotNOTES:• This document is intended to be used as a reference guide to supply useful information for a design or installation. It is notintended to be a step-by step procedure for installation.• Any ceilings or walls must be strong enough to support the monitor and the installation must be in accordance with any localbuilding codes. All mounts should make secure contact to wood studs.• 4:3 sources can be displayed on the 16:9 screen in either normal aspect ratio with bars on the left or right, or stretched horizontallyto fill the screen using the menus (see “Aspect Modes” in menus and user manual).• Distances are in inches, for millimeters multiply by 25.4.Tilt Angle and RotationMonitor may be angled and rotated from normal landscape and portrait orientation to both face up and face down positioning. Rotateonly clockwise for portrait orientation.