NEC M332XS Installation Manual

Also see for M332XS: User manual Quick setup guide Brochure & specs

NEC M332XS Installation Manual Manual pdf 1 page image

NEC Display Solutions of America, Inc.M332XS Installation GuideCeiling Mounted and Desktop Rev 1.0www.necdisplay.com M332XS Page 1 of 6ContentsProduct Description, Lens Specs, Notes and Formulas Pg 1Diagrams & Distance Charts Pg 2Cabinet Dimensions Pg 3-4Ceiling Mount Dimensions Pg 5Input Panel and Control Codes Pg 6Product DescriptionType: 1 Chip DLP Projector Dimensions: 14.5” (W) x 5.3” (H) x 11.5” (D)0.55” DMD Weight: 8.2 lbsResolution: 1024 x 768Brightness: 3300 Lumens Fan Noise: 39 dB / 33dB @ 1 meterBTU’s: 1208 BTU/hour Power Consumption: 354W (max)Lens SpecificationsThrow Ratio: 0.6:1 (for 100” diagonal) Focal Length: 17.5mm – 29.0mmOffset Angle: 40.8° (for 100” diagonal) F/#: 1.7 - 2.1Screen Sizes: 60” - 150” diagonal (4:3) Manual FocusNotes For screen sizes not indicated on the projection tables, use the formulas below.If the figures on the tables do not match the results of formulas, use the figures in the table. All calculations are based on a 4:3 aspect ratio. Distances are in inches, for millimeters multiply by 25.4. Distances may vary 5%.FormulasThe Projection Formulas use the image width for calculation. For proper projection placement, determine the image widthfor the desired screen size. Use the Screen Formulas below to calculate all screen dimensions. Plug in the width for “W” inthe Projection Formulas.Refer to the diagrams and charts for popular screen sizes on page 2:Definitions: 4:3 Screen Formulas:W = Image Width W = H x 4/3H = Image Height (size) H = W x 3/4B = Vertical distance between lens center and screen center Screen Diagonal = W x 5/4C = Throw distanceD = Vertical distance between lens center and screen top(screen bottom for desktop application)α = Throw AngleProjection Formulas:B = 0.5063WC = 0.6W (wide)D = .131Wα = tan-1(B/C)