NEC V230 User Manual

Also see for V230: User manual Quick setup guide Quick setup guide Quick setup guide User manual

Contents

NEC V230 User Manual Manual pdf 73 page image

645. Using On-Screen MenuSetting Eco Mode [ECO MODE]This feature turns on or off the ECO mode. The lamp life can be extended by selecting [ON]. Selecting [ON] alsodecreases fan noise when compared to [OFF] mode.ECO MODE Description Status of LAMP indicatorOFF This is the Default setting(100% Brightness). OffONSelect this mode to increase the lamp life(approx. 90% Brightness on V260X/V230X/V260/V230 and approx.75% Brightnesson V300X.)Steady Green lightNOTE:• The [LAMP LIFE REMAINING] and [LAMP HOURS USED] can be checked in [USAGE TIME]. Select [INFO.] → [USAGE TIME].(→ page 76)• The projector will always enter into the [ECO MODE] [ON] condition for 90 seconds immediately after the projector is turned on.The lamp condition will not be affected even when [ECO MODE] is changed within this time period.• After a lapse of 45 seconds from when the projector displays a blue, black or logo screen, [ECO MODE] will automatically switchto [ON]. The projector will return to the [OFF] mode once a signal is accepted.• If the projector becomes overheated in [OFF] mode because of use in a high-temperature room, there may be a case where the[ECO MODE] automatically changes to [ON] mode to protect the projector. This mode is called “forced ECO mode”. When theprojector is in [ON] mode, the picture brightness decreases. The LAMP indicator’s steady light indicates the projector is in [ON]mode. When the projector comes back to normal temperature, the [ECO MODE] returns to [OFF] mode. Thermometer symbol[ ] indicates the [ECO MODE] is automatically set to [ON] mode because the internal temperature is too high.Setting Closed Caption [CLOSED CAPTION]This option sets several closed caption modes that allow text to be superimposed on the projected image of Videoor S-Video.OFF �� This exits the closed caption mode�CAPTION 1-4 �� Text is superimposed�TEXT 1-4 �� Text is displayed�NOTE:• The closed caption is not available under the following conditions:- when messages or menus are displayed.- when an image is magnified, frozen, or muted.• Portions of superimposed text or closed caption may be truncated. If that happens, try to place the superimposed text or closedcaption within the screen.• The projector does not support optional extended characters for closed captioning.Using Off Timer [OFF TIMER]The remaining countdown time will be displayed at the bottom of the menu when the [OFF TIMER] is preset.1. Select your desired time between 30 minutes and 16 hours: OFF, 0:30, 1:00, 2:00, 4:00, 8:00, 12:00, 16:00.2. Press the ENTER button on the remote control.3. The remaining time starts counting down.4. The projector will turn off after the countdown is complete.NOTE:• To cancel the preset time, set [OFF] for the preset time or turn off the power.• When the remaining time reaches 3 minutes before the projector is turned off, the [THE PROJECTOR WILL TURN OFF WITHIN 3MINUTES] message will be displayed on the bottom of the screen.Selecting Menu Language [LANGUAGE]You can choose one of 27 languages for on-screen instructions.NOTE: Your setting will not be affected even when [RESET] is done from the menu.