182. Installation and ConnectionsConnecting the Supplied Power CordConnect the supplied power cord to the projector.First connect the supplied power cord's three-pin plug to the AC IN of the projector, and then connect the other plugof the supplied power cord in the wall outlet.To wall outletThe projector will go into standbymode. When in standby mode, thePOWER indicator will light orangeand the STATUS indicator will lightgreen when [NORMAL] is selectedfor [STANDBY MODE].CAUTION:Parts of the projector may become temporarily heated if the projector is turned off with the POWER button or ifthe AC power supply is disconnected during normal projector operation.Use caution when picking up the projector.Make sure that the prongs are fully inserted into both thepower plug and the wall outlet.
