464. Convenient FeaturesAlert Mail Settinghttp:///lanconfig.htmlThis option notifies your computer of an error message via e-mail when using wired LAN. An error message notificationwill be sent when the projector lamp has reached the end of its usable life or an error occurs in the projector.HOST NAME ............................ Type in the hostname of the network connected to the projector. Up to 60 alphanumeric char-acters can be used. If the host name is unknown, type in a string of characters representing theprojector. Example: Projector 1DOMAIN NAME ........................ Type in the domain name of the network connected to the projector. Up to 60 alphanumericcharacters can be used. If the domain name is unknown, type in the right side of @ in the sender’saddress. Example: nec. comALERT MAIL ............................. Checking [ENABLE] will turn on the Alert Mail feature.Checking [DISABLE] will turn off the Alert Mail feature.SENDER’S ADDRESS................ Type in the senders address. Up to 60 alphanumeric and symbols characters can be used.SMTP SERVER NAME............... Type in the SMTP server name to be connected to the projector. Up to 60 alphanumeric characterscan be used.RECIPIENT’S ADDRESS 1 to 3 .... Type in your recipient’s address. Up to 60 alphanumeric and symbols characters can be used.APPLY ....................................... Click this button to reflect the above settingsEXECUTE .................................. Click this button to send a test mail to check if your settings are correct.STATUS..................................... A reply to a test mail will be displayed.NOTE:• If you execute a test, you may not receive an Alert mail. Should this happen, check if the network settings are correct.• If you entered an incorrect address in a test, you may not receive an Alert mail. Should this happen, check if the Recipient ’s Ad-dress is correctTIP: The Alert Mail settings will not be affected even when [RESET] is done from the menu.
