NEC PlasmaSync 42XM4 Startup Manual

Also see for PlasmaSync 42XM4: Supplementary guide Supplementary guide Installation guide User manual Specifications

NEC PlasmaSync 42XM4 Startup Manual Manual pdf 17 page image

En-15SpecificationsScreen Size 36.3"(H)20.3"(V) inches922(H)515(V) mmdiagonal 42"Aspect Ratio 16 : 9Resolution 1024(H)768(V) pixelsPixel Pitch 0.036"(H)0.027"(V) inches0.9(H)0.671(V) mmColor Processing 4,096 steps, 68.7 billion colorsSignalsSynchronization Range Horizontal : 15.5 to 110.0 kHz(automatic : step scan)Vertical : 50.0 to 120.0 Hz(automatic : step scan)Input Signals RGB, NTSC (3.58/4.43), PAL (B,G,M,N),PAL60, SECAM, HD*1 , DVD*1 , DTV*1Input Terminals (VIDEO1 and RGB1 can also be used as OUTPUT terminals)RGBVisual 1 (Analog) mini D-sub 15-pin1Visual 2 (Analog) BNC (R, G, B, HD, DV)1*2Visual 3 (Digital) DVI-D 24-pin1* 3VideoVisual 1 BNC1Visual 2 RCA-pin1Visual 3 S-Video: DIN 4-pin1DVD/HDVisual 1 RCA-pin (Y, Cb/Pb, Cr/Pr)1*1Visual 2 BNC (Y, Cb/Pb, Cr/Pr)1*1, *2Visual 3 DVI-D 24-pin1* 3Audio Stereo RCA3(Selectable)External Control D-sub 9-pin1(RS-232C)Sound output 8W+8W at 6 ohmPower Supply AC100-240V 50/60HzCurrent Rating 4.5A (maximum)Power Consumption 285W (typical)Dimensions 40.2 (W)24 (H)3.9 (D) inches1022 (W)610 (H)98(D) mmWeight 66 lbs / 30 kg (without stand)Environmental ConsiderationsOperating Temperature 0°C to 40°C / 32°F to 104°FHumidity 20 to 80% (no condensation)Altitude 720 to 1114 hPa(0 to 9180 feet / 0 to 2800 m)Storage Temperature -10°C to 50°C / 14°F to 122°FHumidity 10 to 90% (no condensation)Altitude 700 to 1114 hPa(0 to 9840 feet / 0 to 3000 m)Other Features Motion compensated 3D Scan Converter (NTSC,PAL, 480I, 576I, 525I, 625I, 1035I, 1080I), 2-3pull down Converter (NTSC, 480I, 525I, 1035I,1080I (60Hz)), 2-2 pull down Converter (PAL,576I, 625I, NTSC, 480I, 525I), Digital ZoomFunction (100-900% Selectable), Video Wall 4-25multi screen, Self Diagnosis, Image Burnreduction tools (PLE LOCK1~3, INVERSE,WHITE, ORBITER (Auto1,2/Manual), SCREENWIPER), Color Temperature select (high/mid/midlow/low, user has 4 memories), Control lock(Except power SW), Auto Picture, Input Skip,Color Tune, Low Tone (3 mode), Auto ID,Programmable Timer, Gamma Correction (4mode), Loop through interface, Plug and play(DDC1, DDC2b, RGB3: DDC2b only),Split screen operationsRegulations UL 60950-1, CAN/CSA-C22.2 No.60950-1-03,FCC class B, ICES-003 class BThe features and specifications may be subject to change withoutnotice.*1 HD/DVD/DTV input signals supported on this system.480P (60 Hz) 480I (60 Hz) 525P (60 Hz)525I (60 Hz) 576P (50 Hz) 576I (50 Hz)625P (50 Hz) 625I (50 Hz) 720P (60 Hz)720P (50 Hz) 1035I (60 Hz) 1080I (50 Hz)1080I (60 Hz) 1080P (50 Hz) 1080P (60 Hz)*2 The 5-BNC connectors are used as RGB/PC2 and HD/DVD2 input.Select one of them under “BNC INPUT”.*3 Compatible with HDCP.Supported Signals• 640480P @ 59.94/60Hz • 19201080I @ 50Hz• 1280720P @ 59.94/60Hz • 720576P @ 50Hz• 19201080I @ 59.94/60Hz • 1280720P @ 50Hz• 720480P @ 59.94/60HzNote: In some cases a signal on the plasma monitor may not be displayedproperly. The problem may be an inconsistency with standards fromthe source equipment (DVD, Set-top box, etc...). If you do experiencesuch a problem please contact NEC Solutions (America), Inc. and alsothe manufacturer of the source equipment.Units are in inch(mm)3.9"(98)1.59"(40.4) 2.31"(57.6)40.2" (1022)24" (610)36.3" (922)20.3" (515)