1256. Installation and Connections❷ Making ConnectionsA computer cable, BNC cable (5-core type), HDMI cable, or a DisplayPort cable can be used to connect to a com-puter.The connection cable is not enclosed with the projector. Please get ready a suitable cable for the connection.Analog RGB signal connection• Connect the computer cable to the display output terminal (mini D-sub 15 pin) on the computer and the computervideo input terminal on the projector. Please use a computer cable attached with a ferrite core.• When connecting the display output terminal (mini D-sub 15 pin) on the computer to the BNC video input terminal,use a conversion cable to convert the BNC cable (5 core) to a mini D-sub 15 pin cable.• Select the source name for its appropriate input connector after turning on the projector.Input connector INPUT button on the projectorcabinet Button on the remote controlCOMPUTER IN 7:COMPUTER 7/COMPUTERBNC IN 4:BNC 4/BNCCOMPUTER INBNC INAUDIO INAUDIO INComputer cable (sold commercially)Stereo mini-plug audiocable (not supplied)RGB - to - BNC cable(not supplied) Stereo mini-plug audio cable (not supplied)NOTE: Please check the operating manual ofthe computer as the name, position and direc-tion of the terminal may differ depending onthe computer.
