Menu
NEC NW891 Instruction Manual
                | |
6Be careful not to confuse hot water inlet and cold water inlet.In using only one water tap or in case of attached one water inlet valve, connect theinlet hose to the cold water inlet valve.For Screw-Shaped TapFor Ordinary TapINLET HOSE CONNECTION1 Pull down the collar ofthe inlet hose to separateit from the water tapadapter.2 Loosen the four screwsproperly in fitting intowater tap.31 2 3Fit the water tap adapterinto the water tap tapand tighten the fourscrews evenly whilepushing up the adapterso that the rubberpacking can stick to thewater tap tightly.4 Remove the tape, andscrew connector B intoconnect A tightly.5 Connect the inlet hose tothe water tap adapter bypuling down the collar ofthe hose end.6 Connect the inlet hoseadapter of the hose tothe water inlet of thewasher by turning itclockwise to be fixedtightly.Connect the inlet hose tothe water tap byscrewing the connectortightly.Connect the connector-inlet supplied ifnecessary.Insert the inlet hoseadapter into the waterinlet of a washer and turnit to be fixed.TAPEConnector BConnector AConnectorConnectorRubberPackingHoseConnectorConnectorRubberPackingHoseConnectorinlet6 |
Related manuals for NEC NW891
This manual is suitable for:
Product
Learn More
Legal
Copyright © 2024 OneStart. All Rights Reserved