Menu
NEC NW891 Instruction Manual
                | |
4Non-Pump Model Pump ModelLocation of washerCheck location where washer will be installed. Make sure you have everythingnecessary for correct installation.Proper installation is your responsibility.•Do not place or store your washer below 0 °C (32°F) to avoid any damage from freezing.•Install the washer on the horizontal solid floor.Drain systemNever forget to install drain hose before operating your washer.The packing box is opened, there are a drain hose, and a hose clamp in the washer.INSTALLATION INSTRUCTIONS• Connect the drain hose to the drain outletat the back side of the washer,i• Connect the drain hose to the drain outletat the back side of the washing machine,Drain hose Drain OutletDrain hoseIf the washer is installed on an unsuitable floor, it couldmake considerable noise, vibrate and cause a malfunction.If washer is not level, adjust the front leg(A) up or down forhorizontal setting.•Earthed electrical outlet(B) is required with 20cm ofbottom back of washer cabinet.•Hot and cold water faucets (C) must be within 1M of theupper back of the washer cabinet and provide waterpressure 0.3kgf/cm 2-8kgf/cm 2CUP DOWNABNOTES• The opening must not be obstructed by carpeting when the washing machine isinstalled on a carpeted floor.4 |
Related manuals for NEC NW891
This manual is suitable for:
Product
Learn More
Legal
Copyright © 2024 OneStart. All Rights Reserved