NEC NP1250 Network Setup Manual

Also see for NP1250 Series: Control commands Command guide Command guide Supplementary guide Specifications

Contents

NEC NP1250 Network Setup Manual Manual pdf 6 page image

6SpecificationsSpecificationsFor United States, Canada, and MexicoProduct Name NP01LM3Operating Voltage 5V (power supplied from the projector)Max Amps Tx: 472 mA (Max)Rx: 300 mA (Max)Wireless Standard IEEE802.11a, IEEE802.11b, IEEE802.11gModulation Method CCK/DQPSK/DBPSK/OFDMLED Display(Blue) During communication: blinkingStandby: slow blinkingNo operation: light offIEEE802.11a CenterFrequencyRange/Operatingchannels5150 to 5350, 5725 to 5850 MHz36,40,44,48,52,56,60,64,149,153,157,161,165channelsTransmissionmethod OFDM method (Orthogonal Frequency DivisionMultiplexing method)Data Rates 54/48/36/24/18/12/9/6 (Mbps)IEEE802.11b CenterFrequencyRange/Operatingchannels2412 to 2462 MHz1 to 11 channelsTransmission method DS-SS method (direct dispersion spectrum dispersionmethod)Data Rates 11/5.5/2/1 (Mbps)IEEE802.11g CenterFrequencyRange/Operatingchannels2412 to 2462 MHz1 to 11 channelsTransmission method OFDM method (Orthogonal Frequency DivisionMultiplexing method)Data Rates 54/48/36/24/18/12/9/6 (Mbps)Interface USB 2.0 (connected to USB wireless LAN port on the projector)Dimensions Width:1.1"/28 mmHeight:0.43"/11 mmLength:3.03"/77 mmWeight 0.042 lbs/19 gEnvironmentalConsiderations Operational Temperatures :41° to 104°F / 5° to 40°C, 20% to 80% humidity (non-condensing)Storage Temperatures :14° to 122°F (-10° to 50°C), 20% to 80% humidity (non-condensing)