1395. Using On-Screen MenuNETWORK SETTINGSImportant:• Consult with your network administrator about these settings.• When using a wired LAN connection, connect a LAN cable (Ethernet cable) to the LAN port (RJ-45) of the projector. (→ page169)TIP: The network settings you make will not be affected even when [RESET] is done from the menu.Hints on How to Set Up LAN ConnectionTo set up the projector for a LAN connection:Select [WIRED LAN] or [WIRELESS LAN] → [PROFILES] → [PROFILE 1] or [PROFILE 2].Two settings can be set for wired or wireless LAN.Next turn on or off for [DHCP], [IP ADDRESS], [SUBNET MASK], and [GATEWAY] and select [OK] and press theENTER button. (→ page 140)To recall LAN settings stored in the profile number:Select [PROFILE 1] or [PROFILE 2] for wired or wireless LAN, and then select [OK] and press the ENTER button.(→ page 140)To connect a DHCP server:Turn on [DHCP] for wired or wireless LAN. Select [ON] and press the ENTER button. To specify IP address withoutusing the DHCP server, turn off [DHCP]. (→ page 141)To set only for wireless LAN (NETWORK TYPE and WEP/WPA):Select [PROFILE 1] or [PROFILE 2] for wireless LAN, and then select [ADVANCED] and [OK] and press the ENTERbutton. The Advanced menu will be displayed. (→ page 142)To select an SSID:Select [ADVANCED] → [SITE SURVEY] and press the ENTER button.Select an SSID and press the > button to select [OK] and press the ENTER button.If you do not use [SITE SURVEY], type the SSID and select [INFRASTRUCTURE] or [AD HOC]. (→ page 142)To receive lamp replacement time or error messages via e-mail:Select [ALERT MAIL], and set [SENDER'S ADDRESS], [SMTP SERVER NAME], and [RECIPIENT'S ADDRESS].Last, select [OK] and press the ENTER button. (→ page 153)To execute [EASY CONNECTION] using Image Express Utility 2.0 or Image Express Utility 2 for Mac:The [EASY CONNECTION] is a mode that can abbreviate the troublesome LAN settings when using the ImageExpress Utility and connecting the PC and projector via a wireless LAN.Image Express Utility 2.0 and Image Express Utility 2 for Mac are contained on the supplied NEC Projector CD-ROM.To use [EASY CONNECTION], select [WIRELESS LAN] → [PROFILES] → [EASY CONNECTION].NOTE: The [EASY CONNECTION] function is available on Windows 7, Windows Vista or Windows XP SP3.
