513. Convenient Features3. Select the projector you wish to connect, and click “Connect”.The target selection window will be displayed.4. Place a check mark for projectors to be connected, and then click “Connect”.• When one or more projectors are displayed, from the menu on the projector, select [INFO.] → [WIRELESS LAN]→ [IP ADDRESS].When connecting with the projector is establised, you can operate the control window to control the projector. (→page 39)NOTE:• When [POWER-SAVING] is selected for [STANDBY MODE] from the menu, the projector that is turned off will not be displayedin the select window for destinationDownloaded From projector-manual.com NEC Manuals
