NEC LCD1511M Service Manual

NEC LCD1511M Service Manual Manual pdf 11 page image

VESA Mount on your monitorThis monitor conforms to the VESA Flat Panel Mounting Physical Mounting InterfaceStandard which defines a physical mounting interface for flat panel monitors, andcorresponding standards for flat panel monitor mounting devices, such as wall andtable arms. The VESA mounting interface is located on the back of your monitor.To mount the monitor on a swing arm or other mounting fixture, follow the instructionincluded with the mounting fixture to be used. Two VESA Mounting Interfaces areincluded in this model; one is located behind the monitor (see figure 1), and the otheris located under the foldable stand. (See figure 2.)Caution! Please select the proper screws!The depth from plastic back cover to the bottom of the screw hole is 8 mm.The spec is M4 screw. To fulfil the safety requirements the monitor must bemounted to an arm which guarantees the necessary stability underconsideration of the weight of the monitor. The LCD monitor shall only beused with an approved arm (e.g. GS mark).(Figure 2)VESAMountingInterface75 mm Slots75 mm(Figure 1)VESAMountingInterface75 mmSlots75 mm7 – User’s ManualEnglish