NEC DT830 Series User Manual

Also see for DT410 Series: User guide Quick reference card

Contents

NEC DT830 Series User Manual Manual pdf 146 page image

138DIAL INTERCOMTo InitiateSTEP 1: Lift handset or press the key.STEP 2: Press DICM key.STEP 3: Dial desired intercom station number. Re-ceive ringback tone.To AnswerSTEP 1: DICM LED flashes, indicating an incoming in-tercom call.STEP 2: Press DICM.STEP 3: Lift handset or press key. LCD showssolid green.STEP 4: If called station is engaged in a non-intercomcall, the station may press DICM after placingthe original call on hold (with key.)To Bridge Into A Dial Intercom CallSTEP 1: Press the DICM key, lift handset or presskey.STEP 2: A three-party conference is established.DT830 DT430/410SpeakerCalled partyICM 21:25 PM MON 22 SEP 2014SpeakerHOLDCalling partyICM 21:25 PM MON 22 SEP 2014Note: Bridging is an optional feature.Note: Dial intercom provides a Dial Intercom groupwhere each member of the group may be calledby a 1-digit or 2-digit number without using theirprime lines.SpeakerOverriding partyOVERRIDE 31:25 PM MON 22 SEP 2014CONF1:25 PM MON 22 SEP 2014