NAD D 3045 Owner's Manual

Also see for D 3045: Quick setup guide Quick setup guide

Contents

NAD D 3045 Owner's Manual Manual pdf 4 page image

ENGLISHUNPACKING AND SETUPWHAT’S IN THE BOXPacked with your D 3045 you will find:• Detachable mains power cord• AMP 3 remote control with 3V CR2025 battery• Eight pieces of dome-shaped feet• Quick Setup GuideSAVE THE PACKAGINGPlease save the box and all the packaging in which your D 3045 arrived.Should you move or otherwise need to transport your D 3045, this is byfar the safest container in which to do so. We’ve seen too many otherwiseperfect components damaged in transit for lack of a proper shippingcarton, so please: Save that box!QUICK SETUPThis simple guide will help you get started with your D 3045.Place the D 3045 on a firm, level surface. Do not place the unit on a softsurface like a carpet.Make all the connections to your D 3045 with the unit unplugged fromthe mains power source. It is also advisable to power down or unplug allassociated components while making or breaking any signal or AC powerconnections.1 Connect applicable speakers to the LEFT and RIGHT SPEAKERS terminalof D 3045.2 Using applicable connectors (not supplied), connect source devices tocorresponding input sockets of D 3045.HDMI $ HDMI ARCS/PDIF sources $ OPTICAL 1, OPTICAL 2, COAXIALAnalog sources $ LINE 1, LINE 2, PHONO (MM)USB sources $ComputerOther sources $ Bluetooth3 Connect corresponding end of the mains power cord to the AC mainsinput of the D 3045 and the plug connected to a mains power source.4 With all applicable sources hooked up to D 3045 and powered up, presso (Standby) to switch ON the D 3045 from standby mode.5 Start listening by rotating the SOURCE knob to select preferred sourceinput. Rotate Volume control knob to adjust audio level.RESTORE D3045 TO FACTORY DEFAULT SETTINGSWhile at operating mode, press and hold remote control’s “DIM” buttonuntil “Reset” appears in the display and Source defaults to OPTICAL 1.GETTING STARTED4