Mitsubishi Electric PAR-SL94B-E User Instructions
Also see for PAR-SL94B-E: Installation manual
OPTIONALPARTSE-129Enables the use of wireless remote controller for ceilingsuspended models.Photo6SHFL¿FDWLRQVPCA-RP KAWireless Remote Controller Kit PAR-SL94B-EUnit : mmDescriptionsApplicable ModelsDimensions5740182 9931Cooler/heater button (start/stop) isprovided.Emergency operationDuring operation: LED (green) is lit,$ODUP/(' JUHHQ ÀDVKHVOperation indicationMax. 16 refrigerant systems per group(One or more wireless light receiversmust be installed for each refrigerantsystem.)Number of units controlledAdapter wiring 9-wire cord (standard accessory) withconnector is connected to the connector(CN90) on the indoor unit control board.Light receiver range 7m or less, at within 45 degrees to the front ofreceiver (the range varies with conditions)Operating conditions Temperature: 0 to 40͠ , Humidity: 30 to 90%(no condensation)Exterior White gray (Munsell 4.48Y 7.92/0.66), ABSresinInstallation method Attached to the brand label case of indoor unit.for Ceiling Suspended models |
This manual is suitable for:
Product
Menu
Learn More
Menu
Legal
Menu
Copyright © 2024 OneStart. All Rights Reserved