Makita VS001G Instruction Manual

Also see for VS001G: Instruction manual Instruction manual Instruction manual Instruction manual Instruction manual

Periodic inspectionsTo ensure a long service life for the appliance andsafety usage, perform the inspections listed belowperiodically.Daily inspections• Waste container: empty the container.• Filters: if they are dirty, cleaning them.• Brushes: if string-like refuse get entangled,remove it.• Control and movable parts: check that they movesmoothly.Weekly inspections• Main brush height: if the height is inappropriate,readjust it.• Screws (when using multifunction adapter): if theyare loose, tighten them.Replacement/replenishment ofconsumable itemsBrush replacementIf the main brushes and side brush become worn out,ask your local Makita service center for replacement.Replacing the main brushesReplace the main brushes if they cannot be adjustedappropriately. Refer to "Main brush height adjustment."For removing and mounting the main brushes, refer to“Cleaning the main brushes.”Replacing the side brushReplace the side brush if it does not contact the floorwhen the side brush height adjusting knob is turned tothe lowest position. Refer to "Side brush height adjust-ment."For removing and mounting the side brush, refer to“Attaching and removing the side brush.”Makita Corporation3-11-8, Sumiyoshi-cho,Anjo, Aichi 446-8502 Japanwww.makita.com885A57-929EN20231204

/ 24

Related manuals for Makita VS001G