18 ENGLISHMounting a MakpacCAUTION: Do not exceed the height 315 mm(12-3/8") when mounting the Makpac.Firmly fit the two securing latches on the left and right into themounting notches of the Makpac to secure the Makpac in place.Max315 mm(12-3/8″)12Fig.40► 1. Makpac 2. Securing latchesRemoving a MakpacDisengage the two securing latches on the left and rightand remove the Makpac.Mounting a portable power packCAUTION: Do not use the appliance with theportable power pack on your back.CAUTION: When mounting a portable power pack onthe multifunction adapter, make sure the cord of the portablepower pack is arranged properly. Otherwise sagging cord maybe scraped by the floor and disconnection, smoke, or fire result.1. Fit the bottom edge of the portable power pack ontohooks A and secure it in place with hook B or hook C. Confirmthat the portable power pack does not detach from the appli-ance by lifting up the handle of the portable power pack lightly.• PDC1200 / PDC1500Fit the bottom edge of the portable power pack onto hooksA and secure it in place with hook B. Confirm that theportable power pack does not detach from the applianceby lifting up the handle of the portable power pack lightly.If the red indicator of the lock button is visible, the porta-ble power pack is not completely locked.4 45123Fig.41► 1. Portable power pack 2. Hooks A 3. Hook B4. Lock button 5. Red indicator• PDC01Fit the bottom edge of the portable power pack ontohooks A and secure it in place with hooks C. Hook B isnot used.1 23Fig.42► 1. Portable power pack 2. Hooks A 3. Hooks C2. Align the triangle marks on the socket of the porta-ble power pack and the plug of the adapter (for the XGTbattery) and fit them together firmly as far as they willgo.123 3Fig.43► 1. Socket of portable power pack 2. Plug of adapter(for XGT battery) 3. Triangle marks3. Open the battery box cover.1Fig.44► 1. Battery box cover